4. Saving a Cut List in Tekla PowerFab and Importing the Cut List in to SP-PLM

Tekla PowerFab
Not version-specific
Tekla PowerFab Tekla PowerFab GO

Saving the Cut List

Sending PLM a cut list and receiving feedback is the most common workflow for this integration. This can be done as a standalone workflow, or as an additional step to the nesting request workflow.

Open the Production Control Job, select "Review" then "Cut Lists" from the Production Control menu.

 

Image
4-1.png



At the bottom of the window, click "New Cut List".

Filter your selection if needed, click "Make Report", then "Save Cut List"

 

Image
4-3.png
Image
4-4.png

 


Enter a description and due date for your cut list. Make sure to check "Share Cut List" so SP-PLM can import it.

 

 

Image
4-5.png



Now, the new cut list will show up on the cut lists screen.

 

Image
4-6.png



Double click a line to see the items on that cut list.

 

Image
4-7.png



Importing the Cut List

In PLM, from the Fabrication Job tab, click Import then select your cut list option

 

Image
4-8.png



Select the cut list job and then the cut list to import; change options as required before clicking OK.

 

Image
4-9.png

  

Image
4-10.png
Was this helpful?